MicroNet Technology SP5101 - Manual (Page 33)

32
3.5.1 Alarm Setting
There are some definitions for the Alarm clock, please check out the detail as
following:
If the alarm clock had been set and the time is up:
z
The phone will be ring in the IDLE and MENU state only.
z If the phone isn’t in the IDLE or MENU state, the phone will ring while the
state back to the IDLE or MENU.
z If the state don’t return to the IDLE or MENU for 30 minutes, the clock will
cancel and don’t ring the phone.
z Ringing the phone every 20 seconds.
z For the ringing tone, depends on the ring melody setting.
z Stop ringing until users pick up the phone set or hand free.
3.5.1.1. Add
This phone set could support 3 entries for the Alarm.
If all the three entries had been taken, LCD will show the message as following
and back to the original page:
→ OK →
If users enter the incorrect month or date, please show the message as
following and back to the original page:
→ OK →
Switch to the Time setting while users press the button in the Date
setting:
→ OK →
The entire format for the date and time are as following:
Year: 2000 ~ 2099; Month: 01 ~ 12; Date: 01~31; Hour: 00 ~ 23;
Minute: 00~59
The schedule will be everyday while user didn’t enter the date for the alarm
clock.
The format of the time setting is as following:
No Room!! >New Entry
> View All
Invalid Input…
>New Entry
> View All
Set Date:
YY/MM/DD
> View All
Set Time:
HH:MM