MicroNet Technology SP5101 - Manual (Page 75)

74
11. –id: Input ID of Provision server.
12. –pwd: Input Password of Provision server.
13. –emstime: Set provision cycle time.
14. –stun: Input STUN server address. (ifaddr –stun 1 61.220.2.2) But you
must take notice when you use this function, you must enable
“ipsharing” function.
15. –stunport: Input port of STUN server.
Note:
Some Proxy servers support endpoint behind NAT function, in this
case SIP Phone doesn’t have to enable IP sharing function, please
contact with your Proxy Server vendor for detail information.
6.10 [pppoe] command
1. -print: display all current configurations and information.
2. –id: to set PPPoE authentication user name.
3. –pwd: to set PPPoE authentication password.