MicroNet Technology SP5101 - Manual (Page 78)

77
6.13 [sip] command
1. –print: display all current configurations.
2. –px
: set proxy server IP address or URL address (sip –px “IP
address or URL of Proxy server”
).
3.
–px2: set alternative proxy server IP address or URL address. If phone
failed to register first proxy, it will try to register this alternative proxy.
4. –pxport:
set listening port of Proxy server.
5. –outpx: set IP address of outbound proxy server. After user set
outbound proxy, all packets form SIP Phone will be sent to outbound
proxy server.
6. –prefix: set prefix string. If user ID contains alphabets, user can set it
as prefix string here. For example, if Account Name is 123, SIP Phone
will sent out messages as Account Name @”IP address of Proxy”, if
user set prefix as abc, SIP Phone will set out as
abc123@”IP address
of Proxy”. This function is for special proxy server.
7. –line
: identify one number for the SIP Phone SP5101 to register to the
Proxy (SIP –line “line number”).
Note: In proxy mode please remember to set user account information
under security command.
8.
–domain: set Domain of phone.