MicroNet Technology SP5101 - Manual (Page 71)

70
Note:
1. After user enter SIP Phone configuration via telnet, please use
login: ” root ”, password: null, press enter to enter command lines.
2. If user forget login password, please contact with your distributor, we
will generate one new password according to LAN Phone’s MAC
address. Please login with “mac” and this new password.
3. User must input lower-case command, but contents of configurations
such as SIP alias or user name etc, user can set as capital case.
4. After any change of configuration, please remember to do commit
command to save changes and then reboot command to reboot
system.
6.1 [help] command
Type help or man or ? to display all the command lists. The following figure is
shown all commands of SIP Phone SP5101.
Command Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
help
quit
debug
reboot
pbook
commit
ping
time
ifaddr
pppoe
flash
sysconf
sip
security
line
voice
phone
tos
prefix
rom
auth
passwd
help/man/? [command]
quit/exit/close
show debug message
reboot local machine
Phonebook information and configuration
commit flash rom data
test that a remote host is reachable
show current time
internet address manipulation
PPPoE stack manipulation
clean configuration from flash rom
System information manipulation
SIP information manipulation
Security information manipulation
Line information manipulation
Voice information manipulation
Setup of call progress tones and ringing
IP Packet ToS (Type of Service)values
Prefix drop/insert information manipulation
ROM file update
Set configuration items for “administrator” user.
Password setting information and configuration
6.2 [quit] command
Type quit/exit/close will logout SIP Phone SP5101 and Telnet Program.