MaxTech PCI Internal Voice/FAX/Data/Speakerphone Modem - Manual (Page 16)

14
Table 4-1 S - Registers
Register Function Range/units Default
S0 Auto-answer Ring 0-255/rings 0
S1 Ring counter 0-255/rings 0
S2 Escape code character 0-127/ASCII 43
S3 Carriage return character 0-127/ASCII 13
S4 Line feed character 0-127/ASCII 10
S5 Backspace character 0-32, 127/ASCII 8
S6 Dial tone wait time 0-255/seconds 2
S7 Remote carrier wait time 1-255/seconds 60
S8 Comma pause time 0-255/seconds 2
S9 Carrier detect time 0-255/0.1 second 6
S10 Carrier loss time 0-255/0.1 second 7
S11 Touch-tone dialing speed 50-255/0.001 second 70
S12 Esc. character detect time 0-255/0.02 second 50
S14 Echo, response, dialing, Bit-mapped
originate/answer
S16 Modem test options Bit-mapped
S18 Modem test timer 0-255/seconds 0
S21 DTR, DCD, DSR, and Bit-mapped
Long Space Disconnect
S22 Speaker and response Bit-mapped
S23 RDL, DTE data rate, Bit-mapped
parity,and guard tone
S25 DTR delay 0-100/seconds 5
S27 Async operation, CCITT/ Bit-mapped
Bell mode
S30 Disconnect timer 0-255/seconds 0
S31 Automode,Trellis coding, Bit-mapped
calling tone, auto-retrain,
rate renegotiation
S33 Sleep mode time 0-90/seconds 10
Section Five - Result Codes
BASIC RESPONSE CODES
OK 0 CONNECT 1
RING 2 NO CARRIER 3
ERROR 4 CONNECT 1200 5
NO DIALTONE 6 BUSY 7
NO ANSWER 8 CONNECT 1200/75 22
CONNECT 75/1200 23 CONNECT 2400 10
CONNECT 4800 11 CONNECT 7200 24
CONNECT 9600 12 CONNECT 12000 25
CONNECT 14400 13 CONNECT 16800 59
CONNECT 19200 14 CONNECT 21600 61
CONNECT 24000 62 CONNECT 26400 63
CONNECT 28800 64 CONNECT 31200 65