McIntosh MVP871 - Manual (Page 21)

21
SETUP, con’t
Note: The title of the icon button-bar will change color
from yellow (the cursor color) to blue indicating
the selected item.
4. Return to the Language Setup Menu by pressing the
Left followed by the Up directional Push-buttons.
5. Next continue to the OSD LANGUAGE Settings. If
no other changes are to be made in Setup Mode at this
time, exit by pressing the RTRN (Return) Push-button.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
OSD Language
This selects the language of the on screen menus that will
be seen on the TV/Monitor. To change from English to
another language perform the following steps:
Note: The Alternate Languages of French and Spanish
may not be available on all DVD Discs when viewing
their menus.
1. Press the SETUP Push-button on the supplied Remote
Control to access the Language Setup Menu. Then
press the Right directional Push-button to select the
OSD Setup Menu Icon Tab. Refer to figures 4 and 5.
Note: If there is a Disc playing in the MVP871 press
the STOP Push-button twice before pressing the
SETUP Push-button.
2. Use the Down directional Push-button on the Re-
mote Control to select the OSD LANGUAGE Menu.
3. To change from the default setting use the Right
directional Push-button followed by Up or Down
directional Push-buttons and then press the SELECT
Push-button.
Note: The title of the icon button-bar will change color
from yellow (the cursor color) to blue indicating
the selected item.
4. Return to the Language Setup Menu by pressing the
Left followed by the Up directional Push-buttons.
5. Next continue to the DIGITAL INTERFACE SETUP
Settings. If no other changes are to be made in Setup
Mode at this time, exit by pressing the RTRN (Return)
Push-button.
Note: The SETUP Push-button may also be pressed to
exit the setup mode.
Digital Interface Setup
This selects the various options when the MVP871 is con-
nected to the TV/Monitor either directly or thru a McIn-
tosh A/V Control Center using the connection.
RGB Setting
1. Press the SETUP Push-button on the supplied Remote
Control to access the On-Screen Language Setup
Menu. Then press the Right directional Push-button
to select the Digital Interface Setup Tab. Refer to fig-
ures 5 and 7.
Note: If there
is a Disc
playing
in the
MVP871
press
the
STOP
Push-
button
twice
before
pressing the SETUP Push-button.
2. Use the Down directional Push-button followed by
the Right directional Push-button on the Remote
Control.
The RGB setting expands the range of the luminace
picture information from black to white. The Enchanced
setting may provide a slightly improved image with some
TV/Monitors.
Notes: The output signal format needs to be set to the
“RGB” Mode. Not all TV/Monitors will support the
RGB Mode. To make changes using the Front Panel
Selector (SELECT and FORMAT Push-buttons) exit
the SETUP Mode.
3. To change from the NORMAL setting use the Up
or Down directional Push-buttons followed by the
SELECT Push-button. Refer to figure 8.
Note: The title of the icon button-bar will change color
from yellow (the cursor color) to blue indicating
the selected item.
Figure 8
Figure 7