McIntosh MVP871 - Manual (Page 6)

6
XLR Connectors
Below is the Pin configuration for the XLR Balanced
Output Connectors on the MVP871. Refer to the diagram
for connection:
PIN 1: Shield/Ground
PIN 2: + Output
PIN 3: - Output
Power Control Connector
The MVP871 Power Control Input/Output Jacks receive/
send Power On/Off Signals when con-
nected to other McIntosh Components.
A 1/8 inch stereo mini phone plug is
used for connection to the Power Con-
trol Input/Output on the MVP871.
Note: The Data ad Power Control Connecting Cable is avail-
able from the McIntosh Parts Department:
Data and Power Control Cable Part No. 170-202
Six foot, shielded 2 conductor, with 1/8 inch stereo mini
phone plugs on each end.
Data and IR Input Port Connectors
The MVP871 Data In Port receives Re-
mote Control Signals. A 1/8 inch stereo
mini phone plug is used for connection.
The IR Ports also use a 1/8 inch stereo
mini phone plug and allow the connec-
tion of other brand IR Receivers to the
MVP871.
RS232 DB9 Connector Pin Layout
1. N/C 6. N/C
2. Data Out (TXD) 7. N/C
3. Data In (RXD) 8. N/C
4. N/C 9. N/C
5. Gnd.
Connector and Cable Information
PIN 1 PIN 2
PIN 3
Power
Control
Ground
N/C
Data
Signal
N/C
Data
Ground
IR Data
Control
Ground
N/C
1. Compact Discs that are not round (e.g. Novelty discs
with octagonal or heart shapes) will not play properly in
the MVP871 and should not be tried, as possible damage
may occur.
2. The MVP871 Audio Video Player is designed to play
all standard CD Audio Discs that conform to the Of-
ficial Compact Disc Standards which is indicated by the
Symbol .
3. The MVP871 will play most of the following discs, how-
ever some recorded discs may not be able to play due to
the condition of the recording:
Super Audio CD (SACD), HDCD, CD-R, CD-RW,
Video CD, Picture CD (Kodak), Fujicolor CD,
WMA(Windows), DVD-Audio, DVD-Video, DVD-R,
DVD+R, DVD-RW, DVD+RW and DivX.
4. The MVP871 plays DivX Videos including DivX 3, 4, 5
and 6 as well as purchased or rented DivX Movies.
5. CD Audio Discs recorded in the MP3 Format will play-
back on the MVP871 except discs that contain multi-
session recordings.
6. The CD audio side of the Dual Disc does not meet the
Compact Disc Digital Audio specifications found in the
industry “Redbook”; the MVP871 may not read the CD
side of a Dual Disc.
7. Several of the DVD, DVD-Audio and SACD perfor-
mance features available on the MVP871 are active only
if the Disc includes the supporting encoded information.
8. DVD-Video Discs are designed to only play in certain
region(s) of the world. A region may be a single country
or a group of countries. Usually on the back cover of
the DVD-Video Disc container is a Globe Symbol with
“Number(s)” or the word “All” inside it. The MVP871 is
designed to play discs for Regions “1” and “All”.
9. Certain Dolby Digital and DTS Encoded Discs display
their own unique Audio Mode Selection menu, every
time the disc is loaded into the player. If you do not
make a choice from this menu, the disc will revert to its
default Audio Mode when play is started.
Disc Information
Disc Information, Connector and Cable Information