McIntosh MVP871 - Manual (Page 36)

36
4. Next continue
to the OTHER
SETUP Menu.
If no other
changes are
to be made in
Setup Mode at
this time, exit
by pressing the
Down direc-
tional Push-but-
ton to select the
EXIT SETUP
menu choice
followed by the
SELECT Push-
button and the
MVP871 will
return to nor-
mal operation.
Note: The
SETUP
Push-
button
may be also pressed to exit the setup mode.
How to Set the Ratings
4. Again, using
the NUMERIC
Push-buttons
on the Re-
mote Control
enter the new
password to
confirm it.
Then press the
SELECT Push-
button. Refer to
figure 60.
5. Press the SE-
LECT Push-
button.
6. Return to the
Ratings Menu
by pressing the
Up direction-
al Push-button.
7. Next continue
to the REG-
ISTRATION
Menu. If no
other changes are to be made in Setup Mode at this
time, exit by pressing the Down directional Push-
button to select the EXIT SETUP menu choice fol-
lowed by the SELECT Push-button and the MVP871
will return to normal operation.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
Registration
The eight digit Registration Code is used when leasing
or purchasing DivX Video On Demand (VOD) format
files for additional information use the Internet and go to
http://www.divx.com/vod. To view the Registration Code
perform the following steps:
1. Press the SETUP Push-button on the supplied Remote
Control to access the Language Setup Menu. Then
press the Right directional Push-button to select the
Ratings Menu Icon Tab.
Note: If there is a Disc playing in the MVP871 press
the STOP Push-button twice before pressing the
SETUP Push-button.
2. Use the Down directional Push-button on the Re-
mote Control to select the REGISTRATION Menu
with the eight digit code. Refer to figures 61 and 62.
3. Return to the Ratings Menu by pressing the Up
directional Push-button.
Figure 59
Figure 60
Figure 61
Figure 62