McIntosh MVP871 - Manual (Page 42)

42
How to Operate the MVP871, con’t
On Screen Icon Display
There are On-Screen Icons available to indicate the current
audio transport operating conditions and some also provide
the ability to make changes to the disc currently being
played. These On-Screen Icons are accessible by pressing
the DISP/TIME, AUDIO or SEARCH Push-button on the
supplied Remote Control. For each of the disc types played
there is at least one On-Screen Icon. If there are more than
one On-Screen Icons for a given disc type, they are ac-
cessed by additional presses of the DISP/TIME Push-but-
ton. Refer to figures 74 and 75.
Once the On-
Screen Icon ap-
pears, changes
to items such as
the Track Play-
ing, the Chapter
Playing, the
Group Playing,
the Elapsed
Time into the
disc or the
Audio Mode, etc. may be accomplished. The highlighted
item or another item can be selected by using the DIREC-
TIONAL,
SELECT AND
NUMERIC
Push-buttons
on the Remote
Control. After
the desired
changes have
been made, the
last press of the
DISP/TIME,
AUDIO or SEARCH Push-button will switch off the On-
Screen Icon.
DVD-Video Direct Title Selection
The MVP871 Front Panel Display indicates the Disc Title
currently playing. Use the Remote Control NUMERIC
Push-button(s) to enter the desired Title Number.
Note: The desired disc Title may also be selected by using
the Search Function. Press the SEARCH Push-button
on the Remote Control until the Title On-Screen Icon
appears, then use the NUMERIC Push-buttons to select
the desired Title.
DVD-Video Direct Chapter Selection
The MVP871 Front Panel Display indicates the Disc
Chapter currently playing. Press the SEARCH Push-button
on the Remote Control until the Chapter On-Screen Icon
appears then use the NUMERIC Push-buttons to select the
desired Chapter.
DVD-Audio Direct Track Selection
The MVP871 Front Panel Display indicates the Disc Track
currently playing. Use the Remote Control NUMERIC
Push-button(s) to enter the desired Track Number.
Note: The desired disc Tracks may also be selected by using
the On-Screen Icon. Press the SEARCH Push-button on
the Remote Control and then NUMERIC Push-buttons.
DVD-Audio Group/Track Selection
To select a desired Group from a DVD-Audio Disc on the
MVP871 press the DISP/TIME Push-button to access the
On Screen Icon. Press the Right or Left  directional
Push-buttons to highlight either the Group or Track On-
Screen Icon. Use the Remote Control NUMERIC Push-
button(s) to enter the desired Track Number followed by
the SELECT Push-button.
SACD and CD Direct Track Selection
The MVP871 Front Panel Display indicates the Disc Track
currently playing. Use the Remote Control NUMERIC
Push-button(s) to enter the desired Track Number.
Note: The desired disc Tracks may also be selected by using
the On-Screen Icon. Press the SEARCH Push-button on
the Remote Control and then NUMERIC Push-buttons.
How to Set and Activate Markers
This feature allows establishing up to eight different start-
ing places on a disc where playback can start, other than at
the beginning of the disc.
1. Press the MRKR (Marker) Push-button and the Marker
On-Screen Icon will appear. Refer to figure 76.
2. Press the SELECT Push-button to enter the first start-
ing loca-
tion. The
highlighted
dot on
the left
side will
change to a
number 1.
3. Press the
Right di-
Figure 74
Figure 75
Figure 76