Multi-Tech Systems MT5634ZBA - Manual (Page 34)

Chapter 4 - AT Commands, S-Registers, Result Codes
34
MultiModemDID User Guide
Command: *DF Format for Reporting Incoming DID Number
Values: 0, 1, 2
Default: 0
Description: This command allows for three different reporting formats of
the incoming number information. This information is output
when either the proper number of digits have been received or
the time out timer has expired and before the modem answers
the call. When set to *DFI, the modem will output one line for
every digit received. For the other formats, the modem will only
output one line per call.
*DF0 “DID:xxx” - Default
*DF1 “DTMFx” for each digit
*DF2 “RINGxxx”
Example Sessions
[15:31:29.100] AT+FCLASS=0
[15:31:29.100]
[15:31:29.100] OK
[15:31:29.160] AT*DS1*DD0*DF0*DN4*DT15
[15:31:29.160]
[15:31:29.160] OK
[15:31:29.160] ATS0=1
[15:31:29.160]
[15:31:29.160] OK
[15:31:40.800]
[15:31:40.800] DID:5980
[15:31:54.920] [DCD]
[15:31:54.920] CONNECT 28800 V42bis
[15:32:00.850] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
[15:32:00.850] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
[15:32:00.850] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
[15:32:06.780] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
[15:32:06.830] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
[15:32:12.600] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
[15:32:12.660] 1234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
[15:32:12.710] +++ATH
[15:32:12.730] [dcd]
[15:32:12.730] NO CARRIER
[15:26:39.260] AT+FCLASS=0
[15:26:39.260]
[15:26:39.260] OK
[15:26:39.260] AT*DS1*DD0*DF1*DN4*DT15
[15:26:39.260]
[15:26:39.260] OK
[15:26:39.310] ATS0=1
[15:26:39.310]
[15:26:39.310] OK
[15:26:52.440]
[15:26:52.440] DTMF5