Minuteman UPS SNMP-32 Series - Manual (Page 19)

19
5. Firmware Upgrade Procedure
This section will guide you through the Firmware Upgrade Procedure of the SNMP-32 Card.
1. Open the ‘SNMP Utility’ group in the Windows ’Start’ Æ ‘Program Group’.
2. Click “SNMP Utility” to initiate the SNMP Utility program (Fig. 24).
Fig. 24-SNMP Utility Group
3. Once the SNMP Utility has been opened, the SNMP Utility will search for the network adapter automatically, or,
click on Network Selection from the main page. The screen will display the network adapter that was located.
Click on the network adapter, and then press “OK” to return to the main page of SNMP Utility (Fig. 25).
Fig. 25-SNMP Utility: Network Selection
4. The SNMP Utility will then search for and display all of the SNMP-32 cards that are on your LAN. Select the
appropriate SNMP-32 card on the right side of the screen, and then click “Download Firmware” (Fig. 26).
Fig. 26-SNMP Utility: Configuration Menu