Minuteman UPS SNMP-32 Series - Manual (Page 20)

20
5. Click , and then browse for the location of the new firmware file. Select the new firmware file (*.bin) and
press “Start”. The SNMP-32 card’s Red and Yellow LEDs will flash alternately, meaning the firmware upgrade is
in process (Fig. 27).
Fig. 27-SNMP Utility: Download Firmware
6. Once the Firmware Upgrade is complete, the SNMP-32 card will auto reboot (Fig. 28). Click “Cancel”, and then
close the SNMP Utility program. The SNMP-32 card is ready for normal operation.
Fig. 28-SNMP Utility: Download Firmware Complete