Minuteman UPS SNMP-32 Series - Manual (Page 21)

21
6. Telnet
6-1. Telnet Configuration
This section will guide you through the Telnet Configuration of the SNMP-32 Card.
1. Select “Start” from Windows, click “Run”, then input Telnet and the SNMP-32 card’s IP Address. Then click “OK”
(Fig. 29).
Fig. 29-Telnet: Startup
2. Telnet connection successful (Fig. 30). Press any key to continue.
Fig. 30-Telnet: Connection
3. If you entered a User Name and a Password, enter them now. If you did not enter a User Name and a Password,
hit enter (Fig. 31).
Fig. 31-Telnet: Login