Minuteman UPS SNMP-32 Series - Manual (Page 34)

34
7-5. Automatic Transfer Switch (ATS)
This section will guide you through the SNMP-32 card’s ATS Web pages. See the ATS User’s Manual for installation
instruction.
1. ATS Status (Fig. 52)
This screen is to show which Input Power Source is being used. Clicking on the “ICON” can switch the input
power source from Input Power Source A to Input Power Source B.
Fig. 52-Automatic Transfer Switch Screen
2. ATS Configuration (Fig. 53)
Identification
The user can define the name of the ATS.
Input Power Source A
The user can define the name of the Input Power Source A.
Input Power Source B
The user can define the name of the Input Power Source B.
Fig. 53-ATS Configuration Screen