Motorola 009 - Manual (Page 35)

. . . . .
Receiving Incoming Items
Using Accompli 009 35
To beam contact information and other items:
1 From within any application, highlight the item you want to beam.
2 Select the Send item button.
3 On the Send item slide-over, highlight either Beam to device, or Beam to printer, and
then select the OK button.
R E C E I V I N G I N C O M I N G I T E M S
When you receive a message or other incoming item sent over-the-air or beamed to your
Accompli 009, a pop-up alerting you to the message appears.
To scroll through the entire message:
Press the N
AV D ISK up or down.
To perform an action on the message or item:
1 Press TAB to move to the spin list.
2 Press the N AV D ISK left or right to display the desired option.
3 Press ENTER to perform the action.
When you are finished acting on the incoming message or item, the screen that you were
viewing prior to receiving the new item redisplays. See Chapter 4, “SMS,” for additional
information about working with incoming messages.
Accompli 009 User's Guide_.book Page 35 Wednesday, June 26, 2002 2:56 PM