MGE UPS Systems 5000 RT - Manual (Page 31)

34008030EN/AA - Page 31
6. Life Cycle Monitoring (LCM)
Reset or disable LCM
In case of any LCM messages displayed:
◗ For temporary reset: press the escape button (24) more than 3 seconds, into Status and Alarm screen , to cancel temporary
the alarm status.
The alert will be repeated twice each 30 days.
◗ For permanent reset: press the enter button (27) more than 3 seconds, into LCM warning screen, to cancel permanently this
LCM event.
At any time:
To Disable all LCM messages select
" disable all " ,into LCM menu with LCD navigation.
Be careful: you will not be aware of any LCM events that can happen on the UPS if you disable all LCM messages.