MITSUBISHI ELECTRIC DV1248ST - Manual (Page 18)

Main Screen Feature Used to…
Menu Bar Adjust scan settings and display information about the
driver.
Combo Boxes Specify different scan settings and apply to the
scanned image, according to the original you want to
scan.
Preview Area Preview the original image in order to obtain a general
understanding of what the image will look like and
adjust the scan area.
Tool Bar Access several advanced tools in order to adjust the
scanned image more precisely.
Status Area Display current image information.
Command Button
and Job List
Manage scan jobs and control scan actions.
Scanning Reflective and Transparent Originals
This section will guide you step by step toward a successful scan:
Scanning reflective originals
Step 1. Place the original face down on the scanner glass plate. Note the
direction of the original so that you will not scan the image with the
wrong orientation. Close the scanner lid.
Step 2. Open your application software.
Step 3. If this is your first scan, you may have to select the TWAIN source by
choosing Select source from the File menu and then selecting
Note the direction