MITSUBISHI ELECTRIC DV1248ST - Manual (Page 72)

Information Window
The Information Window shows the current
settings for the Scanner Driver, Printer,
Image Type, Copy Quality and number of
copies.
Brightness and Contrast
The sliders are used to adjust the image
contrast and brightness.
Drag the slider with your mouse or press
the right and left arrow keys to adjust the
contrast or brightness.
The sliders appear in red when they are in
the middle or grey elsewhere.
Number of Copies
The numeric keys are used to set the copy
number. Valid copy number for output to
printer is from 1 to 99. Press the digit keys
to set the copy number and the number you
set will be shown in the information box.
Note: If you save the output as a file, the
copy number can only be set to 1. The digit
keys are ineffective.
The Clear button clears the copy number
and resets it to 1.
Brightness
Contrast
Sliders
Digit keys
Clear key