MITSUBISHI ELECTRIC DV1248ST - Manual (Page 19)

Diamond View in your application software (You only need to do this
once, unless you re-install your application software). Please note that
the method of selecting the TWAIN source may differ according to the
software you use. For details, please refer to the documents that come
with your application software.
Step 4. Choose Acquire from your application software to bring up Diamond
View (this may also differ according to the application you use).
Step 5. From the Diamond View main screen, select Reflective in the Original
combo box, then click Preview. A preview image will appear in the
Preview Area.
Step 6. Adjust the scan area in the Preview Area.
Step 7. Use the options in the Combo Boxes to specify the Resolution, Scale…,
etc. that will apply to the scanned image.
Step 8. Use the options in the Tool Bar to adjust the image.
Step 9. If you need to add another scan area (scan job) to the original, push
the Duplicate button in the Job List to add a new job. Then repeat
Step 6 and 7 to do the settings for that scan job.
Step 10. After you have finished with the settings for each scan job, press the
Scan button to scan.
Step 11. A few seconds later, the scanned image(s) will be imported into your
application software. You can start to edit the image(s).
Click this button to
add a new job.