MITSUBISHI ELECTRIC DV1248ST - Manual (Page 6)

Copyright
Copyright  2000, Mitsubishi Electric Australia Pty Ltd. All rights reserved. No part
of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system or translated into any language or computer language, in any form
or by any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without prior written permission.
Disclaimer
Mitsubishi Electric Australia Pty. Ltd. makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and specifically disclaims
any warranties, merchantability or fitness for any particular purpose. Further,
Mitsubishi Electric Australia reserves the right to revise this publication and to make
changes from time to time in the contents hereof without any obligation to notify
any person of such revision or changes.
Diamond View is a trademark of Mitsubishi Electric Australia Pty. Ltd. Microsoft and Windows
are registered trademarks of Microsoft Corporation. Other brands and product names are
trademarks or registered trademarks of their respective owners.
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions carefully. Save these instructions for future reference.
2.
Follow all warnings and instructions marked on the product.
3.
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4.
Do not use this product near water.
5.
Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
6.
Openings in the cabinet and the bottom are provided for ventilation to ensure
reliable operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other soft surface. The
scanner should never be placed near or over a radiator or heat register, or in
a built-in installation unless proper ventilation is provided.
7.
The scanner should be operated from the type of power supply indicated on
the rating label. If you are not sure of the type of power available, consult
your dealer or local power company.