Motorola EX500 - Manual (Page 19)

17
English
GETT
ING
STAR
T
E
D
ADJUSTING THE RADIO’S VOLUME
SELECTING A RADIO CHANNEL
Your radio offers sixteen (16) channels for easy
access to required conventional channels.
Some channels on your radio may not be
programmed. Check with your dealer for more
information.
To select a channel:
SENDING A CALL
RECEIVING A CALL
1 Press and hold the Volume Set button (see
page 17); you will hear a continuous tone.
2 Turn the On/Off/Volume knob (see page 16)
and adjust the volume level.
3 Release the Volume Set button (see
page 17).
Turn the Channel Selector knob (see page 15)
clockwise or counter-clockwise until you reach the
desired channel.
1 Turn your radio on.
2 Use the Channel Selector knob (see
page 15) to select to the desired channel.
3 Press the PTT button (see page 15), and
speak clearly with your mouth about 2.5 to 5
cm (one to two inches) away from the micro-
phone.
4 Release the PTT button (see page 15) when
you finish speaking.
1 Turn your radio on.
2 Adjust the radio’s volume.
3 Switch to the desired channel.
4 If at any time a call comes through, you will
hear the call at the volume level you have
set.
03_GettingStarted.fm Page 17 Friday, July 22, 2005 11:12 AM