Motorola EX500 - Manual (Page 21)

19
English
RA
DIO CA
LL
IN
F
O
RM
AT
IO
N
RADIO CALL INFORMATION
RECEIVING A SELECTIVE CALL
Selective Call allows a radio user to
communicate with a single unit without
involving other units in conversation.
When you receive a selective call:
• You will hear two alert tones.
• The LED Indicator will light yellow.
To answer the call, press the PTT button.
RECEIVING A CALL ALERT ™ PAGE
When your radio receives a Call Alert page, it
sounds four alert tones continuously until you
respond.
Press the PTT button to answer the Call Alert
page, or press any other key to cancel it.
Note: Your radio will not receive any Selective
Calls until you clear the page.
EMERGENCY ALARMS
If programmed by your dealer, the orange Top
button can send one of the following
emergency alarms described below:
• MDC Emergency Alarm (only if the
signaling system you are on is MDC),
and
• Emergency Siren
Note: The MDC Emergency Alarm feature
gives you a one-button quick access to
call a particular radio or center (pre-
defined by your dealer) in emergency
situations. When activated, the radio
goes into an Emergency state, which
can be programmed to
• continually give visual and audio
feedback,
• give no audio feedback, but with
visual feedback, or
• give no audio/visual feedback, but
the radio can receive and transmit.
04_RadioCall.fm Page 19 Friday, July 22, 2005 11:13 AM