Motorola EX500 - Manual (Page 26)

24
English
SCAN
ADDING A DELETED NUISANCE
CHANNEL BACK TO THE SCAN
LIST
SCAN CHANNEL DISCOVERY
ALERT
Sometimes you need to know which channel
the radio has switched to during a scan
operation. The Scan Channel Discovery Alert
gives you this information.
After you have stopped a scan operation, this
feature gives you audio feedback when you
select the last channel that was switched to by
the scan operation.
To do this:
SCAN LIST MEMBER PRIORITY
A channel in your scan list may be prioritized
(check with your dealer for details). In such a
case, the radio will check that prioritized
channel more frequently than the other non-
prioritized channels.
Assuming a scan list with 6 channels, if all your
channels are non-prioritized, the normal scan
operation would check for activity in the
following sequence:
1 Press the Scan button ( see page 17 ) to stop
the scan operation.
2 Press the Scan button again to re-start the
scan operation.
1 Stop the scan operation.
2 Turn the Channel Selector knob (see page
15) to change the channels.
3 When you reach the last channel the scan
operation switched to, the radio sounds an
alert tone.
Ch.1
C
h .3
Ch .4
C
h
.5
C
h .2
C
h
.6
05_Scan.fm Page 24 Friday, July 22, 2005 11:13 AM