3 connection to the telephone network 3-9, 4 testing the telephone connection 3-9, 5 telephone exchange system 3-9 – MITSUBISHI ELECTRIC MIM-G01 User Manual
Page 19: Connection 3-9, Exchange system 3-9, Testing the telephone connection 3-9
3.2.3
Connection to the Telephone Network
Connection to telephone network (PSTN) is established via the included telephone cable and
the "Line" jack of the MAM.
To get access to your Mitsubishi Super Modem 56k, the telephone number of the connection
used must be known.
3.2.4
Testing the Telephone Connection
In order to check the telephone number of the connection used, plug an usual telephone into the
appropriate socket and dial the number by another telephone, or from a mobile. If the telephone
at the appropriate socket rings, the number is correct.
In order to check if the telephone connection supports the CLIP feature, dial from the appropriate
connection to another telephone. If the calling number is shown at the called party end, the CLIP
feature is supported.
If calls were successful in both directions, you can connect your Mitsubishi Super Modem. The
modem is now ready to be called and receive messages.
3.2.5
Telephone Exchange System
When connecting to a telephone exchange (PABX), take care if an outside line prefix is neces-
sary.
Mounting and Installation
Super Modem 56k (MIM-A01)
Mitsubishi Industrial Modem
3 - 9
1
2
3
4
5
6
1 - b2
2 - W
3 - a
4 - b
5 - E
6 - a2
Fig. 3-8
The Mitsubishi Super
Modem 56k supports the
a/b leads (3 and 4).