MITSUBISHI ELECTRIC MIM-G01 - Manual (Page 53)

8.2.6 Message Commands
AT+TList - Displaying Received Messages
AT+T Delete - Deleting a Stored Message
Appendix AT Commands MIM-A01
Mitsubishi Industrial Modem 8 - 19
AT+T List = "type"
Displays a list of all received messages of the indicated message type.
Type: The type of the messages to be displayed. The following types are sup-
ported:
ALL All messages
SMS SMS (mobile and PSTN).
Express Express E-Mail
EMail Internet e-mail.
Response:
+Tlist=Entry#1, type#1, time#1
+Tlist=Entry#2, type#2, time#2
...
+Tlist=Entry#n,type#n,time#n
OK
Entry#n: Number of the entry.
The corresponding message can be referenced with this number
to read it out or delete it.
Type#n: Message type of the nth entry in the list.
Time#n: Time stamp of the corresponding message. It is generated by the Modem
when the message has been received completely.
Example:
AT+T List="ALL" Show all received messages.
Modem reply:
+T List=11,SMS,2001/10/7,12:05:55
+T List=12,SMS,2001/10/7,12:10:16
+T List=21,Express,2001/10/7,12:22:27
OK
AT+T List="SMS" All received SMS messages are shown.
Modem reply:
+T List=11,SMS,2001/10/7,12:05:55
+T List=12,SMS,2001/10/7,12:10:16
OK
AT+T Delete=Number.
Deletes the message with the indicated number from the memory of the modem.
Number: Number of the message to be deleted.
This number can be determined through the List command. To delete
the first stored message (that is the oldest), enter a 0 (zero) as the
number.
Example:
A message with the number 11 will be deleted:
AT+T Delete=11
Modem reply:
OK