Motorola CDMA 800/1900 MHz - Manual (Page 17)

6809495A97-O May 15, 2006 17
Level 2 Service Manual Tools and Test Equipment
Tools and Test Equipment
The following table lists tools and test equipment recommended for disassembly
and reassembly of Q telephones. Use either the listed items or equivalents.
Table 1. General Test Equipment and Tools
Motorola Part Number
1
Description Application
RSX4043-A Torque Driver Used to remove and replace screws
—
Torque Driver Bit T-6, Apex 440-6 Torx or
equivalent. Torque setting is 1.25 in-lbs
or 14 Ncm
Used with torque driver
See Table 7 Rapid Charger
Used to charge battery and power
phone
0180386A82
Antistatic Mat Kit (includes 66-80387A95
antistatic mat, 66-80334B36 ground
cord, and 42-80385A59 wrist band) Provides protection from damage to
device caused by electrostatic discharge
(ESD)
19501980 (AMS) 2 Generic Press Tool
0-00-00-40849 (AMS)
2
keyboard adapter Used to install keyboard
0-00-00-30005 (AMS) 2
Disassembly tool, plastic with flat and
pointed ends (manual opening tool) Used during assembly/disassembly of
phone
1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) at (800) 422-4210 or
FAX (800) 622-6210; Internationally, AAD can be reached by calling (847) 538-8023 or by fax (847) 576-3023.
2. Not available from Motorola. To order, contact: AMS Software & Elektronik GmbH, c/o Holger Grube, Lise-Meitner-
Straße 9 D-24941 Flensburg Tel.: +49-461-90398-0 Fax: +49-461-90398-50
2
Q CDMA
6809495A97-O