Removing and replacing the main board – Motorola CDMA 800/1900 MHz User Manual
Page 28
Advertising
28
May 15, 2006
6809495A97-O
Disassembly
Q CDMA
Removing and Replacing the Main Board
1.
Remove the battery door, battery, rear housing, antenna, and daughter board
as described in the procedures.
2.
Use the disassembly tool to unseat the display flex connector (See Figure 15).
G
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
060250o
Figure 15. Removing the Display FLEX Connector
Disassembly tool
Flex connector
Advertising