Removing the daughter board – Motorola CDMA 800/1900 MHz User Manual
Page 25
Advertising
6809495A97-O
May 15, 2006
25
Level 2 Service Manual
Disassembly
Removing the Daughter Board
1.
Remove the battery door, battery, rear housing, and antenna as described in
the procedures.
2.
Insert the disassembly tool under the daughter board and rotate the
disassembly tool to unseat the daughterboard from its connector on the main
PC board (see Figure 9).
3.
Lift the daughter board away from the phone.
4.
To replace, align the daughter board to the main PC board and then gently
press the daughter board connector to fully seat the connector into the main
board socket.
5.
Replace the antenna, rear housing, battery and battery door as described in
the procedures.
060213o
Figure 12. Removing the Daughter Board
Daughter board
Disassembly tool
Advertising