Removing the camera assembly – Motorola CDMA 800/1900 MHz User Manual
Page 26
Advertising
26
May 15, 2006
6809495A97-O
Disassembly
Q CDMA
Removing the Camera Assembly
1.
Remove the battery door, battery, rear housing, antenna, and daughter board
as described in the procedures.
2.
Insert the flat end of the disassembly tool under the edge of the camera
connector and rotate the tool to unseat the camera connector from the socket
(see Figure 13),
G
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
060215a
Figure 13. Removing the Camera Assembly Connector
Camera
connector
Advertising