Motorola E360 - Manual (Page 143)

Using Your Phone’s Menus
14 2
To change the code:
1 Select the Security Code option.
2 When prompted, enter the current security code. (You must
enter this code before you can proceed.)
3 When prompted, enter a new, six-digit code to replace the
old security code.
SIM PIN
This option is used to change your SIM card’s PIN. The
SIM PIN
option must be set to On to use this option. (See “SIM PIN” on
page 140.)
1 Select the SIM PIN option.
2 When prompted, enter the Old PIN .
3 When prompted to Enter New PIN , enter a new, four- to
eight-digit code to replace the old PIN.
4 Enter the new PIN again when the phone displays Repeat
New PIN .
Caution: If you enter an incorrect SIM PIN three times in a row,
your SIM card is disabled and your phone displays the message
SIM Blocked . You need to enter a PIN unblocking key (PUK)
code (which you can obtain from your service provider) and key
sequence before you can use the phone.
To unblock your phone, enter the following key sequence:
## 0 5 * SIM PUK + New PIN + New PIN +