Motorola E398 GSM User Manual
Page 22
Advertising
22
April 21, 2004
6809480A37-O
Disassembly
E398/E399 GSM
3.
At the top of the front housing, gently pry up and lift the transceiver PC board
out of the front housing.
4.
To replace, insert the bottom of the circuit board into the bottom of the front
housing (display side down) and gently press the top of the circuit board into
the front housing.
5.
Replace the rear housing, battery, and battery cover as described in the
procedures.
Figure 8. Removing and Replacing the Transceiver PC Board
Transceiver PC Board
Disassembly
Tool
Front
Housing
Advertising