Removing and replacing the volume switch dome – Motorola E398 GSM User Manual
Page 27
Advertising
6809480A37-O
April 21, 2004
27
Level 1 and 2 Service Manual
Disassembly
Removing and Replacing the Volume Switch Dome
1.
Remove the battery cover, battery, rear housing, and transceiver PC board, as
described in the procedures.
2.
Lift the switch domes out from the front housing as shown in Figure 13.
3.
To replace, insert the volume switch dome into the proper location in the front
housing.
4.
Replace the transceiver PC board, rear housing, battery, and battery cover as
described in the procedures.
Figure 13. Removing and Replacing the Volume Switch Dome
Front Housing
Volume Switch
Dome
Plastic
Tweezers
Advertising