Removing and replacing the keypad – Motorola E398 GSM User Manual
Page 26
Advertising
26
April 21, 2004
6809480A37-O
Disassembly
E398/E399 GSM
Removing and Replacing the Keypad
1.
Remove the battery cover, battery, rear housing, and transceiver PC board, as
described in the procedures.
2.
Lift the keypad up from one corner as shown in Figure 12 and remove it from
the front housing.
3.
To replace, align the keypad with the front housing and press it into place.
4.
Replace the transceiver PC board, rear housing, battery, and battery cover as
described in the procedures.
Figure 12. Removing and Replacing the Keypad
Front Housing
Keypad
Plastic
Tweezers
Advertising