Motorola E398 GSM - Manual (Page 28)

28 April 21, 2004 6809480A37-O
Disassembly E398/E399 GSM
Removing and Replacing the Display
1. Remove the battery cover, battery, rear housing, and transceiver PC board as
described in the procedures.
2. Using the disassembly tool, gently pry up the display and lift it up from the
transceiver PC board as shown in Figure 14.
3. Using the disassembly tool, gently pry up the display flex connector from the
transceiver PC board.
4. To replace, place the display flex connector on the transceiver PC board display
connector and press it into place.
5. Lay the display on the transceiver PC board and gently press it into place.
6. Replace the transceiver PC board, rear housing, battery, and battery cover as
described in the procedures.
Figure 14. Removing and Replacing the Display
Disassembly Tool Display
Disassembly Tool Disassembly Tool
Disassemb Display
Flex Connector
Disassembly
Tool