Mark Levinson N390S - Manual (Page 55)

55
5. Repeat the process of “teaching” new special commands
until all desired commands have been learned by your
remote control.
If you take longer than approximately ten seconds between
button pushes, the Nº390S will time out and return to normal
operation. If this occurs, return to step #1 in this section. You
may move through the entire list by pressing repeat.
6. When finished, return to normal operation by allowing the
Nº390S to “time out.”
The Nº390S will “time out” and return to normal operation
after approximately ten seconds.
Special Commands Table Command Display
positive control for operate OPERATE
positive control for standby STANDBY
positive control for stop JUST STOP
set display intensity to off DISPLAY 0
set display intensity to medium DISPLAY 2
positive control for unpause UNPAUSE
positive control for pause PAUSE
positive control for leaving the repeat mode NO REPEAT
positive control for open drawer OPEN
positive control for close drawer CLOSE
positive control for random play RANDOM
positive control for selecting analog inputs ANALOG
positive control for selecting digital inputs DIGITAL
positive control for program – PROG –
positive control for program + PROG +
Select CD input SET CD
Select RCA input SET RCA
Select optical (EIAJ) input SET OPT