Miller Electric 500DX R - Manual (Page 38)

OM-129 647 Page 34
7-9. Inspecting And Cleaning Optional Spark Arrestor Muffler
ST-800 633-B / Ref. ST-180 933-B
Y Stop engine and let cool.
1
Spark Arrestor Muffler
2 Cleanout Plug
Remove plug and remove any dirt
covering cleanout hole.
3
Exhaust Pipe
Start engine and run at idle speed
to blow out cleanout hole. If nothing
blows out of hole, briefly cover end
of exhaust pipe with fireproof
material.
Y Stop engine and let cool.
Reinstall cleanout plug.
Tools Needed:
3
2
1
3/8 in
7-10. Overload Protection For Models With CV Option
1 Circuit Breaker CB3
CB3 protects the 115 volt ac output
to Remote receptacle RC3 and ter-
minal strip 2T.
If CB3 opens, the 115 volt ac output
stops.
2
Circuit Breaker CB4
CB4 protects the 24 volts ac output
to Remote receptacle RC3 and ter-
minal strip 2T.
If CB3 opens, the 24 volt ac output
stops.
.
Press button to reset circuit
breaker. If a breaker continues
to open, contact Factory Au-
thorized Service Agent.
1
ST-800 862-A / ST-148 404
2