MiTAC 7521 PLUS/N - Manual (Page 36)

35
7521 7521 Plus / N N/B MAINTENANCE Plus / N N/B MAINTENANCE
Power down of 10Base-T/100Base-TX sections when not in use
Jabber control and auto-polarity correction for 10Base-T.
User programmable LED function mapping
Supports software, enhanced software, and automatic polling schemes to internal PHY status monitor and interrupt
Supports 10BASE-T, 100BASE-TX, and any future
Supports PC97, PC98, and Net PC requirements - Green PC compatible
Supports Advanced Configuration and Power Interface Specification (ACPI) Revision 1.0
Supports PCI Bus Power Management Interface Specification Version 1.0a
Supports Network Device Class Power Management Specification Version 1.0a
Supports PCI Hot-Plug Specification Revision 1.0
Implements full OnNow features including pattern matching and link status wake-up with automatic internal PHY status
polling
Implements optional Magic Packet TM remote wake-up scheme
Implements IEEE 802.3x compliant Flow Control
Additional features
Internal 128-bit Multicast Hash Table address filter
Serial EEPROM support
Boot ROM supports up to 128 Kbytes
Extensive programmable internal/external loop back capabilities
+3.3V power supply with +5V tolerant I/Os
128pin PQFP package. Low-Power CMOS 0.35um Technology