MiTAC 7521 PLUS/N - Manual (Page 67)

66
7521 7521 Plus / N N/B MAINTENANCE Plus / N N/B MAINTENANCE
2.2.7 SO-DIMM
Disassembly
1. Remove the keyboard to access the SO-DIMM sockets. (See section 2.2.6 Disassembly.)
2. Pull the retaining clips outwards (n) and remove the SO-DIMM (o). (figure 2-15)
Figure 2-15
Reassembly
1. To install the SO-DIMM, match the SO-DIMM's notched part with the socket's projected part
and firmly insert the SO-DIMM into the socket at 20-degree angle. Then push down until the
retaining clips lock the SO-DIMM into position.
2. Replace the keyboard and the Easy Start panel. (See section 2.2.6 Reassembly.)