MiTAC 7521 PLUS/N - Manual (Page 68)

67
7521 7521 Plus / N N/B MAINTENANCE Plus / N N/B MAINTENANCE
2.2.8 LCD Assembly
Disassembly
1. Open the top cover and remove the Easy Start panel. (See steps 1 to 2 in section 2.2.6 Disassembly.)
2. Remove the two hinge covers by inserting a flat screwdriver to the rear of the cover and pry the
cover out. (figure 2-16)
Figure 2-16 Figure 2-17
3. Open the top cover. Unplug the three cable connectors coming from the LCD assembly,
and remove four screws of the hinges. Now you can separate the LCD assembly from the
base unit. (figure 2-17)