Microsoft MOTHERBOARD USER'S GUIDE PXP43 - Manual (Page 30)

26
Using BIOS
PXP43 Motherboard User’s Guide
Data (www mm:dd:yy) Mon 04/28/2008
Standard CMOS Setup
This option displays basic information about your system.
f SATA1 Not Detected
SATA2 Not Detected
SATA3 Not Detected
SATA4 Not Detected
SATA5 Not Detected
Help Item
f
CMOS Setup Utility -- Copyright (C) 1985-2008, American Megatrends, Inc.
Time (hh:mm:ss) 00:25:44
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
SATA1~6/PATA MASTER/SLAVE f
CMOS SETUP UTILITY - Copyright (C) 1985-2008, American Megatrends, Inc.
SATA1
Type Auto
LBA/Large Mode
Auto
Block (Multi-Sector Transfer Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T Auto
32Bit Data Transfer Enabled
Help Item
Select the type
of device connected
to the system.
Device : Not Detected
IDE BusMaster Enabled
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default settings F1: General Help
mn < >
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default settings F1: General Help
mn < >
This motherboard supports six SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
SATA1
f
f
f
f
f
f
SATA6 Not Detected
PATA MASTER Not Detected
PATA SLAVE Not Detected