Microsoft MOTHERBOARD USER'S GUIDE PXP43 - Manual (Page 41)

37
Using BIOS
Chapter 3: Using BIOS
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Supervisor Password
This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Supervisor Password
Install or Change the
password.
Help item
Supervisor Password :Not Installed
Change Supervisor Password Press Enter
Press <Esc> to return to the main menu setting page.
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized defaults or
not. You select [OK], and then <Enter>, the Setup Utility loads all default values; or
select [Cancel], and then <Enter>, the Setup Utility does not load default values.
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default settings F1: General Help
mn
< >