Microsoft MOTHERBOARD USER'S GUIDE PXP43 - Manual (Page 34)

30
Using BIOS
PXP43 Motherboard User’s Guide
Memory Remap Feature (Enabled)
This item allows users to enable or disable memory hole remapping.
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency Auto
Configure DRAM Timing by SPD Enabled
Memory Remap Feature Enabled
HPET Enabled
Help Item
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default settings F1: General Help
mn
< >
Options
Press <Esc> to return to the main menu setting page.
HPET ( Enabled )
This item enables or disables HPET (High Precision Event Timer) support.
Auto
667 MHz
800 MHz
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The defual setting is auto
and we recommend users leave the setting unchanged. Modify it at will may case the
system to be unstable.
Configure DRAM Timing by SPD (Enable)
When this item is set to enable, the DDR timing is configure using SPD. SPD (Serial
Presence Delete) is located on the memory modules, BIOS reads information coded
in SPD durinbg system boot up.
Intel Robson Enabled
Intel Robson (Enabled)
This item enableds or disables Intel Robson (Intel Turbo Memory Technology)
support.