Microsoft MOTHERBOARD USER'S GUIDE PXP43 - Manual (Page 35)

31
Using BIOS
Chapter 3: Using BIOS
Onboard SATA Mode (Enhanced)
Onboard AUDIO Function (Enabled)
USB Functions (Enabled)
On Chip SATA2 Controller (Enabled)
Onboard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices.
Press <Esc> to return to the main menu setting page.
Use this item to enable or disable the onboard Audio function.
Use this item to enable or disable the USB function.
Use this item to select the mode of the Serial ATA.
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Integrated Peripherals
Onboard SATA Mode Enhanced
Onboard LAN Function Enabled
Onboard LAN Boot ROM Disabled
Onboard AUDIO Function Enabled
Serial Port1 Address 3F8/IRQ4
USB Functions Enabled
Legacy USB Support Enabled
On Chip SATA2 Controller Enabled
Help Item
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default settings F1: General Help
mn < >
Options
Disabled
Compatible
Enhanced
This item allows you to enable or disable the onchip Serial ATA controller.