Microsoft MOTHERBOARD USER'S GUIDE PXP43 - Manual (Page 42)

38
Using BIOS
PXP43 Motherboard User’s Guide
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the
Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears,
select [OK] to save and exit, or select [Cancel] to return to the main menu.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made in
the Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog
box appears, select [OK] to discard changes and exit, or select [Cancel] to return to
the main menu.
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been
installed, Installed displays. If not, Not Installed displays.
Change User Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the user password.
User Password
This page helps you install or change a password.
Press <Esc> to return to the main menu setting page.
This concludes Chapter 3. Refer to the next chapter for information on the software
supplied with the motherboard.
If you have made settings that you do not want to save, use the “Exit Without
Saving” item and select [OK] to discard any changes you have made.
Install or Change the
password.
Help item
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
User Password
User Password : Not Installed
Change User Password Press Enter
: Move F10: Save ESC: Exit Enter : Select +/-/: Value
F9: Load Default settings F1: General Help
mn < >