McIntosh C41 - Manual (Page 11)

11
C41 Front Panel Controls, Push-Buttons and Switch
POWER switch
turns all AC
power completely
ON or OFF
RECORD switch
selects the program
signals that are fed
to the TAPE Outputs
LIS PROCESSOR
push-button turns
the Listen Proces-
sor loop on or off
LISTEN switch selects
the program signals that
are fed to the MAIN and
OUTPUTS 1&2
VOLUME control
adjusts the volume
level at the balanced
and unbalanced out-
puts as well as adjust-
ing input level cali-
bration
REC PROCESSOR
push-button turns
the Record Proces-
sor loop on or off
MONO push-button
combines left and right
stereo signals to mono
at the MAIN and
OUTPUTS 1&2
MUTE push-
button mutes
audio in all
Listen outputs
OUTPUTS 1 and 2 push-
buttons allow the C41 to
switch AC power control
and audio to two separate
stereo power amplifiers
STANDBY/ON push-
button turns the C41
ON or OFF (Standby)
HEADPHONES
jack accepts dy-
namic headphones
IR Sensor receives
commands from a
remote control
LOUDNESS provides
frequency response
contoured to compen-
sate for the behavior of
the human ear at softer
listening levels
TREBLE control provides
12dB boost or cut with a
flat center position
BASS control provides
12dB boost or cut with
a flat center position
The BALANCE control
adjusts the relative vol-
ume balance between
channels