McIntosh C41 - Manual (Page 8)

8
McIntosh D/A Converter
McIntosh CD Transport
How to Connect the C41
How to Connect the C41
1. Connect cables from the Balanced MAIN OUTPUTS to
the power amplifier inputs.
Note: If your power amplifier has only unbalanced inputs, the
Main Unbalanced Outputs can be used.
2. Connect cables from the C41 LISTEN PROCESSOR
FROM jacks to the outputs of a signal processor. Con-
nect cables from the C41 LISTEN PROCESSOR TO
jacks to the signal processor inputs.
Note: Connect a signal processor to the RECORD
PROCESSOR jacks in a similar manner.
3. Connect cables from the C41 CD INPUTS to the out-
puts of a McIntosh D/A Converter and CD Transport.
4. Connect cables from the C41 TUNER INPUTS to the
outputs of a tuner.
5. Connect cables from the C41 TAPE 1 OUTPUTS to the
record inputs of the tape recorder and the C41 TAPE 1
INPUTS to the tape recorder outputs.
Note: Connect any additional recorders to the TAPE 2 or T3/
DVD jacks in a similar manner.
6. Connect a Power Control cable from the C41 MAIN
POWER CONTROL jack to the Power Control In of a
McIntosh power amplifier.
7. Connect a Power Control cable from the C41 POWER
CONTROL ACC jack to the Power Control In of a
McIntosh Tuner and then onto the next McIntosh
Source Component.
8. Connect a Data cable from the C41 CD DATA PORT to
the DATA IN of a McIntosh D/A Converter and CD
Transport.
9. Connect a Data cable from the C41 TUNER DATA
PORT to the DATA IN of a McIntosh tuner.
10. Plug the C41 AC power cord into a live AC outlet.
In Out
Listen Signal
Processor
McIntosh Power Amplifier
McIntosh Tuner
To AC Outlet
Out In
Tape Recorder