McIntosh C41 - Manual (Page 18)

18
Specifications
Specifications
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
Total Harmonic Distortion
0.002% From 20Hz to 20,000Hz
Signal To Noise Ratio
Phono, 90dB below a 10mV input, (84db IHF)
High Level, 103dB below rated output, (93db IHF)
Maximum Voltage Output
Phono, 90mV
High Level, 10V
Output Impedance
250 ohms (unbalanced)
500 ohms (balanced)
Sensitivity
Phono, 2.5mV for 2.5V rated output (0.5mV IHF)
High Level, 250mV for 2.5V rated output (50mV IHF)
Input Impedance
Phono, 47K ohms, 65pF
High Level, 22K ohms
Maximum Input Signal
Phono, 90mV
High Level, 10V
Voltage Gain
Phono to Tape Out: 40dB
High Level to Tape Out: 0dB
High Level to Main Out: 20dB
Rated Output Voltage
Main and Outputs 1 and 2: 2.5Vrms
Maximum Voltage Output
Main and Outputs 1 and 2: 10Vrms
Tone Controls
Bass Control ± 12dB @20Hz
Treble Control ± 12dB @20kHz
Power Requirements
100 Volts, 50/60Hz at 20 watts.
110 Volts, 50/60Hz at 20 watts.
120 Volts, 50/60Hz at 20 watts.
220 Volts, 50/60Hz at 20 watts.
230 Volts, 50/60Hz at 20 watts.
240 Volts, 50/60Hz at 20 watts.
NOTE: Refer to the rear panel of the C41 for the correct
voltage.
Dimensions
17-1/2” (44.5cm) W, 5-3/8” (13.7cm) H, 17-1/2” (44.5cm)
D, (including clearance for connectors)
Weight
20.6 pounds (9.3 Kg) net, 35 pounds (15.9 Kg) in shipping
carton