Minolta Magicolor 3100 Series - Manual (Page 200)

3-198
RRP6.5 SENSOR PHOTO:MSI (PL6.1.4)
Figure: SENSOR PHOTO:MSI Removal
Removal
1) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2) Remove the COVER MSI. (RRP1.11)
3) Remove the TRAY ASSY MSI. (RRP1.12)
4) Remove the COVER ASSY FRONT. (RRP1.13)
5) Remove the ACTUATOR MSI. (RRP6.11)
6) Remove the connector (P/J135) on the SENSOR PHOTO:MSI from the CHUTE ASSY OUT (PL6.1.1).
7) Release the hooks at 3 positions securing the SENSOR PHOTO:MSI to the CHUTE ASSY OUT.
8) Remove the SENSOR PHOTO:MSI from the CHUTE ASSY OUT.
Replacement
Replace the components in the reverse order of removal.