Minolta Magicolor 3100 Series - Manual (Page 407)

Chapter 8 Printer Specifications
8-407
4. Functions
4.1 Recording System
OPC drum, 4-tandem cartridges , electro-photographic system using intermediate transfer rolls
4.2 Exposure System
Semiconductor laser, simultaneous scanning by 4 beams
4.3 Development System
Development with dry type 2-component developer
4.4 Fixing System
Heat fusing of the free belt nip system
4.5 Resolution
Two types of resolutions can be switched. Printing speed is halved at 1200dpi
◆ Main scanning direction:600 dots/25.4mm (by video signal from controller)
1200 dots/25.4mm (by video signal from controller) (half-speed mode)
◆ Sub scanning direction:600 dots/25.4mm (fixed)
1200 dots/25.4mm (fixed) (half speed mode)
4.6 Operation Mode
The printer can be operated in either of 2 operation modes. The modes are switched over by command
from the printer controller or change of printer operation, etc.
◆ Running mode
State in running or recording operation
Fixing system: Held at operating temperature.
Exposure system: Operating status
23.6in,600mm
7.9in, 200mm