Messages – MITSUBISHI ELECTRIC M341i User Manual
Page 28
28-
Messages
STORAGE
CONSUMPTION
The storage status for SMS messages can be consulted.
To view the number of messages stored, the total available space on the Phone memory and
on the SIM card:
BROADCAST
-
CELL
BROADCAST
(
CB
)
MESSAGES
These messages are broadcast by the networks to GSM users and may provide general informa-
tion about local area dialling codes, weather reports, traffic, news, etc. Each type of message is
numbered, allowing you to select the type of information you wish to receive.
Up to 5 types of messages can be programmed into the selection list.
16 standard message types are pre-programmed into the phone for your selection. New mes-
sage types can be programmed into the selection list using the 3 digit cell broadcast type
number. Contact your service provider for details about the type of messages they broadcast.
Before you activate the broadcast message service, you must enter at least one message type
in the selection list.
ENTERING
A
MESSAGE
TYPE
IN
THE
SELECTION
LIST
ACTIVATING
/
DEACTIVATING
THE
BROADCAST
SERVICE
READING
BROADCAST
MESSAGES
Broadcast messages are displayed whilst the phone is on standby. If a broadcast message is re-
ceived whilst in conversation or operating the menu, it only become visible once the mobile revert to
the standby display. A message can contain up to 93 characters and may be displayed on several
pages.
OPTIONS
ON
MESSAGE
DISPLAY
Press
Exit
to clear the CB message displayed. Press the call key to dial the number contained
in the message.
Press
Options
to display the following menu:
1
Press
OK
. Select
Messages
.
2
Select
Storage used
. The
SMS memory used
is displayed. Scroll down to access the
SIM
archive.
3
Select
Details
for more information on the Phone and SIM stored messages (use up and
down arrow keys to scroll to the
required
information).
1
Press
OK
. Select
Messages
.
2
Select
Settings
.
3
Select
Broadcast
.
4
Select
Message types
and select one of the empty types (
[...]
). Select
OK
.
5
Select
Modify by list
(or
Modify by code
if the type number is known).
6
Select the message type(s) you wish to receive and select
Valid.
7
Select
Save
to store your setting.
1
Press
OK
. Select
Messages
.
2
Select
Settings
.
3
Select
Broadcast
.
4
Select
Reception
and select
On
or
Off
.
5
Select
Save
to store your setting.
OPTION
ACTION
Delete
To delete the current message
Delete All
To delete all the received CB messages
Numbers
To display all phone numbers contained in the message text and dial or store
them in the phonebook if required.
Broadcast
Off
To deactivate cell broadcast.